General Tech Post general Mercedes Tech questions here.

Peeling console and interior door handles on SLK 320

Old Sep 19, 2011 | 09:26 PM
  #1  
mrcdsbnzgirl's Avatar
Thread Starter
|
Junior Member
Joined: Sep 2011
Posts: 2
Default Peeling console and interior door handles on SLK 320

I've been reading the forum and I haven't found a remedy for repairing the peeling problem. I live in NJ and have a 2002 320 SLK red exterior w/black and sand interior. The interior was already peeling, but I further damaged the (sand) console & riser by thinking I could pull off all the rubberized spray paint. Some of the rubberized paint is hard to scrape off so my interior is a mess. I've gone to salavage websites, but they haven't gotten back to me with a used console and riser. I hope someone here can help me find the right solution. It's current condition is driving me crazy. If someone has successfully corrected this problem, your help would be greatly appreciated.
 
Old Jan 31, 2012 | 02:06 PM
  #2  
christian's Avatar
Junior Member
Joined: Jan 2012
Posts: 1
Default

sorry to hear mrcdsbnzgirl , i am about to buy a SLK 230 1998 and it has the same problem and so i am also very ineterested on a solution, surely someone knows.
 
Old Feb 11, 2012 | 04:35 PM
  #3  
mrcdsbnzgirl's Avatar
Thread Starter
|
Junior Member
Joined: Sep 2011
Posts: 2
Default Peeling console & interior door handles

After much searching on the internet and finding nothing suitable, I contacted a dealer in NJ and they have a guy who restores the interior by using some kind of rubberized spray paint. Looks so much better but cost me $400. Btw, over time it could start peeling again!
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Joe Beach
Mercedes C Class
7
Dec 27, 2013 08:36 AM
AustMerc
General Tech
3
Apr 12, 2008 06:49 AM
maureenclarke
Mercedes C Class
1
Apr 25, 2007 08:28 PM
BikerDrew
Interior
4
Sep 26, 2005 11:25 PM
vernon97e420
Interior
1
Feb 12, 2005 06:03 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 08:27 PM.