malfunction after battery change
#1
malfunction after battery change
hi guys this may be very simple but im not sure - iv just changed the battery on my sisters c180 and there is a message on the dash saying [ elec stabil not available ] 1 malfunction . does anybody have any clues any help or advice would be great many thanks [ sg1 ]
#2
RE: malfunction after battery change
Use OBD Reader to read the Malfunction code
and OBD Reader will also be able to CLEAR the
Malfunction code;
Of course; you want to clear up the malfunctioning
situation
Try this;
remove BOTH battery terminals from Battery
Turn Ignition on
Of course nothing will register as there is no power
Turn Key ON
Leave to Crank On/ON position for 60 seconds to
PURGE capacitors and resistors
Your MB memory will be WIPED OUT
Reset all your necessarys; including clock, alarm code,
etc etc.
Now BEFORE you do this; ASK your local MB Tech.
On American/Jap cars I have done this and successfully cleared the Mal codes, no problem.
MB's-sheesh; its always something eh?
OR USE THE OBDII Reader/Scan
and OBD Reader will also be able to CLEAR the
Malfunction code;
Of course; you want to clear up the malfunctioning
situation
Try this;
remove BOTH battery terminals from Battery
Turn Ignition on
Of course nothing will register as there is no power
Turn Key ON
Leave to Crank On/ON position for 60 seconds to
PURGE capacitors and resistors
Your MB memory will be WIPED OUT
Reset all your necessarys; including clock, alarm code,
etc etc.
Now BEFORE you do this; ASK your local MB Tech.
On American/Jap cars I have done this and successfully cleared the Mal codes, no problem.
MB's-sheesh; its always something eh?
OR USE THE OBDII Reader/Scan
Thread
Thread Starter
Forum
Replies
Last Post
krl
General Tech
5
04-08-2007 12:01 AM
krl
Mercedes SL Class
0
04-07-2007 09:25 PM
james320mb
General Tech
4
01-01-2007 11:03 PM
1, battery, c240, change, class, clear, fl, malfunc, malfunction, mercedes, mercedezbenz, replacement, reset