hello need help
#2
RE: hello need help
the lock is only actuated by vacuum element.
apply air pressure instead of vacuum to the line and it will unlock.
your next question will be: where is the vacuum line located?
apply air pressure instead of vacuum to the line and it will unlock.
your next question will be: where is the vacuum line located?
#4
RE: hello need help
i see.... he used the wrong hammer. what's inside the trunk that gives him interest anyway?
if you can hear the trunk locking "unlocking", then it's just a mechanical problem now.
you need to change that lock anyway, so why not get a good drill and start removing it.
the only problem that i can see now is that you are going to bring two keys all the time if you will not order a set of key and lock for the whole car (ignition switch, doors, glove box, and trunk).
if you want to try thr pneumatic...here's the diagram.
[IMG]local://upfiles/1/4B84310319F1499B829F243ED197D1BB.jpg[/IMG]
if you can hear the trunk locking "unlocking", then it's just a mechanical problem now.
you need to change that lock anyway, so why not get a good drill and start removing it.
the only problem that i can see now is that you are going to bring two keys all the time if you will not order a set of key and lock for the whole car (ignition switch, doors, glove box, and trunk).
if you want to try thr pneumatic...here's the diagram.
[IMG]local://upfiles/1/4B84310319F1499B829F243ED197D1BB.jpg[/IMG]
Thread
Thread Starter
Forum
Replies
Last Post
Suziguns
New Mercedes Benz Forum Members Area
1
07-07-2007 01:10 PM
mwhitsett
New Mercedes Benz Forum Members Area
0
12-14-2005 08:18 PM