300TD, wagon, 1987
#1
300TD, wagon, 1987
[font="Times New Roman"][/font][hr]Hi y'all, this is my first thread. I own a used 1987 300TD, 124, have been driving it now about 3 yrs., has been a great car. I have a couple of questions, 1st, can the fuel injectors be removed without removing the glow plugs? 2nd, I have a problem with the idle of this OM602 engine, it hunts. I don't know how to adjust this. On my previous 220 unit that I drove for 11 yrs. and 300000 miles, I knew how to do this but this injection pump is slightly different. Also where can I buy a CD or maint. manual for this unit without paying a arm and leg. I did buy one from Bentley publications but it does not get very technical. any help would be appreciated, thanks.
#3
RE: 300TD, wagon, 1987
Hi Sleepwalker, your right about the engine No. and thanks for your information, I have at least one injector that is messing up sometimes, so I guess I'll pull all of them and clean them up. On my previous 240 I cleaned them with solvent and sharp wood dowel, is this the proper way or is there something better. Also, are the injectors adjustable on nozzle pressure spray?
#4
RE: 300TD, wagon, 1987
yes.
[IMG]local://upfiles/1/354A47EC135C4478A8CF5D328C488DFA.jpg[/IMG]
[IMG]local://upfiles/1/AD538E2F3F9B43C5AB8076D48DB0AB18.jpg[/IMG]
[IMG]local://upfiles/1/2E8B10A18DA246E39307EDC87AC877B3.jpg[/IMG]
[IMG]local://upfiles/1/354A47EC135C4478A8CF5D328C488DFA.jpg[/IMG]
[IMG]local://upfiles/1/AD538E2F3F9B43C5AB8076D48DB0AB18.jpg[/IMG]
[IMG]local://upfiles/1/2E8B10A18DA246E39307EDC87AC877B3.jpg[/IMG]
#5
RE: 300TD, wagon, 1987
Thanks sleepwalker, and you are right about the engine no. being OM603. What is the proper wrench to use on the pipe nuts, I would suppose a pipe open end , is this correct? By the way thanks for the schmatic of the injectors, big help.
Thread
Thread Starter
Forum
Replies
Last Post
UKMercNut
For Sale / Trade Classifieds
0
12-17-2008 12:24 PM
kcidmusic
New Mercedes Benz Forum Members Area
1
01-03-2005 11:31 PM