no signal to injectors, wiring loom o.k.
Thread Starter
|
Junior Member
Joined: Sep 2010
Posts: 2
no signal to injectors, wiring loom o.k.
diagnosing a no start condition (98 sl500) with good fuel pressure, good spark. will fire with starting fluid. It has good fuel pressure, good continuity from ecm harness to injectors, and good spark. there are no obdII codes, only a message "start error" and all mil's are on with key in run position. Could this be caused by the factory security device or is a failed ecm?
Last edited by souporfli73; Sep 27, 2010 at 11:01 AM. Reason: not enough info
Thread
Thread Starter
Forum
Replies
Last Post
lakerfan
New Mercedes Benz Forum Members Area
0
Jun 24, 2008 10:15 PM
