"Service Threshold Reached"
#2
Service Threshold Reached
Hi Leshchuk,
My E wdb 211 046 too are having the same problem code : C249f Service threshold reached
i too still waiting for a reply
hope some one can help us out..!
rockerfella174
My E wdb 211 046 too are having the same problem code : C249f Service threshold reached
i too still waiting for a reply
hope some one can help us out..!
rockerfella174
#3
The threshold that is referenced by that code is for the brake pump staying on too long before building pressure. May need assembly. If you retrieved the code then your mechanic can communicate with the SBC hydrolic system and replace unit and bleed. Good Luck!
#4
call the dealership. that very well could be warranty. they are warrantied for life or 10 yrs i think. you need a new SBC brake pump.
#5
chassis221
Hi chassis221 do you have a number to contact you? I need service on a 2006 e350 please call me at 267-333-3289 Sonny or : cruzmcauley@yahoo.com
#7
AS replaced how do I reset the codes
I need info on how to reset eveything now that I put a new ABS pump in which Benz said was out of warrenty. The red no drive light is on in the circle and I have 3 codes which I will retrieve and add to this post.C1617,C21C,C26EC
Last edited by luweegy; 12-20-2013 at 04:07 PM.
#8
You need to clear the fault codes to get the lights to clear. Is this a car with SBC braking system? Who installed the part?
#9
Yes it is.My Benz dealer in Denver said it was out of warrenty.So I bought the part and installed it.I've tried to dissable the system to bleed it with my Solus Pro and it never completes the cycle and says cycle key and try again.I removed the ground on the trunk battery befoer I did this. My Email is evilzr1@gmail if that is easier for you.Thank you for the help. Finally got it to Activate and all is good.
Last edited by luweegy; 12-21-2013 at 05:41 PM.
Thread
Thread Starter
Forum
Replies
Last Post
raltherr
For Sale / Trade Classifieds
0
11-21-2010 10:23 AM
PeterTaps
Mercedes E Class
2
02-07-2010 03:20 PM