Question on Camshaft seal on 104 motor-300CE 24 valve
Thread Starter
|
Member
Joined: Jul 2004
Posts: 40
Question on Camshaft seal on 104 motor-300CE 24 valve
How far does the camshaft seal have to go in when installing?
Dos it have to be flush with the metal cover?
as I took the upper timing chain cover off as I have to replace
the U shaped seal.
The seal on the camshaft was leaking and it was flush with the
metal cover where it goes in, but when I gently tapped in, it
went in another 0.25" almost, so not sure how far does the seal
has to be pushed in.
Any help would be great.
Dos it have to be flush with the metal cover?
as I took the upper timing chain cover off as I have to replace
the U shaped seal.
The seal on the camshaft was leaking and it was flush with the
metal cover where it goes in, but when I gently tapped in, it
went in another 0.25" almost, so not sure how far does the seal
has to be pushed in.
Any help would be great.
Thread
Thread Starter
Forum
Replies
Last Post
02benzc32
For Sale / Trade Classifieds
0
Dec 28, 2006 09:52 PM
