How do I replace the crankshaft pulley on a c280 engine

Reply Subscribe

Thread Tools

Search this Thread

Oct 28, 2011 | 05:15 PM

maxbenz79

Thread Starter

Junior Member

Joined: Oct 2011

Posts: 2

How do I replace the crankshaft pulley on a c280 engine

Hi guys I am new here and wanted to get some help replacing the crankshaft pulley on my 2006 c280. Any help would be great.

Thanks

Will

Nov 2, 2011 | 12:48 AM

livefreeordie

Member

Joined: Nov 2007

Posts: 95

From: NH

Check your other thraed!

Nov 2, 2011 | 08:35 PM

chassis221

Senior Member

Joined: Feb 2007

Posts: 2,691

From: Philadelphia, Pa

Quote:

Originally Posted by maxbenz79

Hi guys I am new here and wanted to get some help replacing the crankshaft pulley on my 2006 c280. Any help would be great.

Thanks

Will

get the proper size socket and a large breaker bar with a 2 or 3 inch extension, and a hollow pipe to put on the end of the breaker bar for leverage. you will need a crank holder to hold the crank while trying to break the nut loose.
why do you need to replace it? there was a recall for earlier cars for the pulley but that didnt include your car.

Last edited by chassis221; Nov 2, 2011 at 09:06 PM.