420 SEL mirror switch question
Thread Starter
|
Junior Member
Joined: Oct 2007
Posts: 7
420 SEL mirror switch question
Hi-
I did search the forum for my answer before deciding to post, and could not find my answer.
My passenger mirror was not working ('87 420 SEL) so I took the center console off where the switch is.... I noticed that the 6 wires had come loose and out of the switch assembly which attaches to the switch (or perhaps the previous owner disconnected them... i am not sure.... I soaked the switch really well in contact cleaner, so now i want to see if i can get the mirror working and determine if the switch is bad...
my question is, i am not sure which wires go where (1,2,3,4,5,6)
see attached photo..... I just need to know which color wire goes into which hole.
thanks in advance.
Newbie
[IMG]local://upfiles/27454/9B744B9A1F234C3B851A77771EDD9242.jpg[/IMG]
I did search the forum for my answer before deciding to post, and could not find my answer.
My passenger mirror was not working ('87 420 SEL) so I took the center console off where the switch is.... I noticed that the 6 wires had come loose and out of the switch assembly which attaches to the switch (or perhaps the previous owner disconnected them... i am not sure.... I soaked the switch really well in contact cleaner, so now i want to see if i can get the mirror working and determine if the switch is bad...
my question is, i am not sure which wires go where (1,2,3,4,5,6)
see attached photo..... I just need to know which color wire goes into which hole.
thanks in advance.
Newbie
[IMG]local://upfiles/27454/9B744B9A1F234C3B851A77771EDD9242.jpg[/IMG]
Thread
Thread Starter
Forum
Replies
Last Post
