heater blower?
#1
heater blower?
Hello all,
i have mercedes clk 200 year 2000..
few days ago my heater or blow any cold or hot air i checked the fuse under the bonnet its ok is there any other fuse for it if yes where is it located if not then what could have have gone if the blower is gone where is located
thanks
i have mercedes clk 200 year 2000..
few days ago my heater or blow any cold or hot air i checked the fuse under the bonnet its ok is there any other fuse for it if yes where is it located if not then what could have have gone if the blower is gone where is located
thanks
#3
RE: heater blower?
Hey all.
I just replaced my heater blower and mono valve in my '89 300E.
After reading here the symptoms: No main heater fan and only a little heat from the vents.
The aux fan works but gets cold fast.
The valve sends hot coolant to the core normally. I was getting some heat when on the highway.
I bought a UK Haynes shop manual (ISBN:1 85960 253 3) from Amazon.com(uk) that said it was in Romanian.
It is in english as the cover showes. Even the people at Amazonuk thought it was in Romanian.
It's backwads in spots and uses some words like slacken and prise instead of loosen and pry but it's understandable.
Took me about 5 hours but I was being carefull and taking pictures along the way.
Once I got the motor and valve from socalmercedesparts (Matt was helpfull to get the right one) I made a date with my work clothes and did it.
I have heat! (and money in my pocket)
I feel I can face the future with aplomb with my 19 (204k) year old 300E.
I also bought a helpfull guide (ISBN:0-9584026-1-2) that is not a shop manual but has some diagrams the Hanes didn't have.
Hope thgis helps.
Ciao,
benzinportland
I just replaced my heater blower and mono valve in my '89 300E.
After reading here the symptoms: No main heater fan and only a little heat from the vents.
The aux fan works but gets cold fast.
The valve sends hot coolant to the core normally. I was getting some heat when on the highway.
I bought a UK Haynes shop manual (ISBN:1 85960 253 3) from Amazon.com(uk) that said it was in Romanian.
It is in english as the cover showes. Even the people at Amazonuk thought it was in Romanian.
It's backwads in spots and uses some words like slacken and prise instead of loosen and pry but it's understandable.
Took me about 5 hours but I was being carefull and taking pictures along the way.
Once I got the motor and valve from socalmercedesparts (Matt was helpfull to get the right one) I made a date with my work clothes and did it.
I have heat! (and money in my pocket)
I feel I can face the future with aplomb with my 19 (204k) year old 300E.
I also bought a helpfull guide (ISBN:0-9584026-1-2) that is not a shop manual but has some diagrams the Hanes didn't have.
Hope thgis helps.
Ciao,
benzinportland
Thread
Thread Starter
Forum
Replies
Last Post
necompressor
For Sale / Trade Classifieds
2
01-18-2005 06:06 PM