Flooding at startup
<IMG src=smileys/smiley11.gif border="0"></P>
When I try to start my 87 300e (3.0l) the motor strtsfor about 1/2 second and dies. Upon trying to start after that it just cranks away. After the second time trying to start, when I remove the air filter, it is very powerfully gassy. There is good(?) compression, 170lbs each cyl, and the spark is a bluish/ yellow color. The only thing that can be left is timing, or the ign parts all need to be replaced, which parts are on order for. </P>
Is there anything simple that I am overlooking?</P>
Gotten your 300 running yet? My 260E did the same thing and it turned out to be the fuel pump relay. Actually the relay is a printed circuit board in an enclosure that looks like a large relay. Located on the passenger side of the car under a dust cover against the firewall. Mine ran for a second, then quit. Just turned over after that. Replaced the module (relay) and it's been running fine for over 5 years. Good luck! <img border="0" src=smileys/smiley20.gif border="0">
Thread
Thread Starter
Forum
Replies
Last Post
thewreckerman02
Mercedes E Class
3
Jan 16, 2009 10:37 AM




