Bleed 300e ABS Brales
Thread Starter
|
Junior Member
Joined: Nov 2007
Posts: 4
From:
Bleed 300e ABS Brales
'91 M-B 300e
I'm unable to get anything but air when bleeding the brakes. I replace the left rear caliper & got air when bleeding with 2 man old pump pedal method.
Then I replaced the Master Cylinder thinking it was defective. Still same problem.
Now using a power bleeder & all I'm getting is air out the brake lines.
ABS system without traction control.
Makes no difference to start engine
Why no fluid going into brake system?
I'm stumped.
Thanks for any help,
Rod
I'm unable to get anything but air when bleeding the brakes. I replace the left rear caliper & got air when bleeding with 2 man old pump pedal method.
Then I replaced the Master Cylinder thinking it was defective. Still same problem.
Now using a power bleeder & all I'm getting is air out the brake lines.
ABS system without traction control.
Makes no difference to start engine
Why no fluid going into brake system?
I'm stumped.
Thanks for any help,
Rod
Thread
Thread Starter
Forum
Replies
Last Post
