Mercedes E Class Mercedes E320 and Mercedes E500 Sedans and Wagons.

Sponsored by:
Sponsored by:

bently or DIY articles on replacing front + rear strunt?

Old Jun 19, 2006 | 06:59 PM
  #1  
siccmade's Avatar
Thread Starter
Joined: Apr 2006
Posts: 55
Default bently or DIY articles on replacing front + rear strunt?

or am i not able to do such a task in my garage.. i dont really wanna pay tireplus the 1200 dollars. i really just need informatioin on replacing them, any kind words or url links would be appreciated.
 
Old Jun 19, 2006 | 07:44 PM
  #2  
Battlecat714's Avatar
Joined: Apr 2006
Posts: 436
From:
Default RE: where can i find some bently or DIY articles on replacing front + rear strunt?

for what car?
 
Old Jun 19, 2006 | 08:55 PM
  #3  
siccmade's Avatar
Thread Starter
Joined: Apr 2006
Posts: 55
Default RE: where can i find some bently or DIY articles on replacing front + rear strunt?

sry about that. 94 e320 sedan.
 
Old Jun 20, 2006 | 03:50 AM
  #4  
Battlecat714's Avatar
Joined: Apr 2006
Posts: 436
From:
Default RE: where can i find some bently or DIY articles on replacing front + rear strunt?

have you tried searching http://mb.braingears.com/?
 
Old Jun 20, 2006 | 06:42 AM
  #5  
sleepwalker's Avatar
Super Moderator
Joined: Apr 2004
Posts: 7,050
From: Philippine Islands
Default RE: bently or DIY articles on replacing front + rear strunt?

got spring compressor?
 
Old Jun 20, 2006 | 02:47 PM
  #6  
siccmade's Avatar
Thread Starter
Joined: Apr 2006
Posts: 55
Default RE: bently or DIY articles on replacing front + rear strunt?

thanks for the site battlecat.. i did not find any instrutions or steps on installing new struts tho.. also is there any good site that any1 would suggest for ordering new struts? im gonna try to do this my self and no sleepwalker i dont think i have spring compressor
 
Old Jun 20, 2006 | 07:14 PM
  #7  
jvision09's Avatar
Joined: Nov 2004
Posts: 43
From:
Default RE: bently or DIY articles on replacing front + rear strunt?

hello there

i replaced my front struts on my 1994 e320 in my garage using a rented spring compressor from an auto shop. Other than your basic wrenches, you will need an Allen type wrench (the ones that look like an L) and some strength to remove some of the bolts. I would also reccomend replacing the strut mounts (found them on ebay for 30 bucks a pair) As for the struts themselves I found them at autozone.com. for 75 a piece (monroe senstrac). If you give me your email i can send you a pdf file that gives the instructions on how to install them. Hope this helps.

j-mang
 
Old Jun 21, 2006 | 09:07 PM
  #8  
siccmade's Avatar
Thread Starter
Joined: Apr 2006
Posts: 55
Default RE: bently or DIY articles on replacing front + rear strunt?

hey thanks for the reply guys, i think i got a better picture of what needs to be done now, also some fool i know will also help me out on replacing them so i should be fine.
J Mang, if you can send me the urls of the struts n mounts that would be gr8. i looked thro autozone.com but i wasn't sure which once to get. thanks a ton man.
 
Old Jun 21, 2006 | 09:52 PM
  #9  
jvision09's Avatar
Joined: Nov 2004
Posts: 43
From:
Default RE: bently or DIY articles on replacing front + rear strunt?

i uploaded the pdf to my site, the link is below:

www.blueboxpcs.com/strut.pdf

feel free to ask any other questions

j-mang
 
Old Jun 23, 2006 | 01:56 PM
  #10  
siccmade's Avatar
Thread Starter
Joined: Apr 2006
Posts: 55
Default RE: bently or DIY articles on replacing front + rear strunt?

j-mang.. can you tell me if these r the front struts u ordered?
autozone link
and these are the rear..? (25 dollars?..)
autozone link

or can any1 post a name or site or url of some strut that will fit my situation? thanks a ton.
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:03 AM.