2008 Mercedes C300- P0305
#1
2008 Mercedes C300- P0305 & P2015
Hello,
I have a question with the code P0305 and P2015 and I was wondering if any of you guys could help? A few weeks ago I changed my intake manifold since that plastic piece broke and decided to replace the entire thing. The car ran fine afterward and a few days ago I noticed a slight shaking when I put the car into either the D or R position it would do a slight rattle under 1k rpm and go away until I hit a complete stop and then proceed to accelerate again. If you have advice or suggestion please feel free to drop it below
I have a question with the code P0305 and P2015 and I was wondering if any of you guys could help? A few weeks ago I changed my intake manifold since that plastic piece broke and decided to replace the entire thing. The car ran fine afterward and a few days ago I noticed a slight shaking when I put the car into either the D or R position it would do a slight rattle under 1k rpm and go away until I hit a complete stop and then proceed to accelerate again. If you have advice or suggestion please feel free to drop it below
Last edited by havocdev; 04-16-2019 at 07:53 PM. Reason: New issue
#2
Hello and welcome to the forum! That is a generic code indicating that you have a misfire in the number 5 cylinder. You likely need to use a Mercedes specific scan tool to gather more info. We'd recommend something like the below link - let us know if you have any other questions. Thanks.
We're going to start a Group Buy on it shortly. I'll post a link in the forum when it happens.
https://www.pelicanparts.com/catalog...STGEN1_pg5.htm
We're going to start a Group Buy on it shortly. I'll post a link in the forum when it happens.
https://www.pelicanparts.com/catalog...STGEN1_pg5.htm
Thread
Thread Starter
Forum
Replies
Last Post