Welcome,
I am having an intermittent problem with my driver window. It starts working for awhile then it stops. Also my CD Changer says NO CD Changer

Suggestions, please

 

Year and Model???

-mar-

 

99 C230, my apologies

 

I see it...1999 C230 Kompressor. I'm pretty sure what's happening with your car. It's shutting down your CAN (Control Area Network) System and it's using your driver's window as a default, which is common. My advice is to get checked at the dealership coz it's a little complicated than you think. There are several components tied into the CAN System, and you don't want to pay unnecessary repairs from an Independent Shop or Gas Stations. Dealerships use SDS, and they can diagnose CAN Problems on you car. I canfixyour car, but I'm here in VA., and I use the samediagnostic equipment as the dealership, and I charge a lot LESS!

take care,
-mar-

 

posted yesterday no reply maby you can help i have a2003 c 230 coupe with a check engine light on odb 2 scanner says code p0365 which is cam position sensor b bank 1 I am assuming that would be left side near the rear of the engine but cant seem to locate it to see if it will ohm out or not any help would be great

 

As far as your CD Changer...probably just programming in you D2B System needs to be configured via SDS.

take care,
-mar-

 

Thanks,
Here's wishing I was in VA
I am not very happy with my only Mercedes dealership here.

 

I apologize...

take care,
-mar-

 

On your car, I believe you have two CAMsensors...one for the exhaust cam, and one for the intake CAM. My suggestion is that I wouldn't attempt to replace those CAM Sensors, because your car have CAM Advance Mechanism, and if it's not adjusted properly...you'll get a lot of drivability problems. You can check the resistance between the two wires, but whose to say it's not mechanical problem??? Becareful...

take care,
-mar-

 

Thanks Mar just dreading the trip back to the dealer the local shop is 2 hours away and nicknamed Jesse James moters lol Thanks again for your help