New to Diesels
Well, I finally found my dream car. It is a 1979 240D in very good condition except in doesn't run. The lady said the oil pressure went down and it just slowed to a stop going down the highway. I have been working on cars for over 40 years, this is my first diesel. I found the main lead to the glow plug box on the firewall toasted and the lead removed on the gp side of the box. I'm thinking this wire didn't unscrew itself off the terminal and that maybe here husband fried it trying to find the real problem. Anyway, I have to repair that and ohm out the series type glowplugs. All I have is a Haynes manual. Any recommendations for a good shop manual that will tell you somehthing other than take it to the dealer?
Is it a no no to shoot WD40 or starting fluid into the intake of diesel to see if it will hit? This is a non-turbo. Any ideas would be greatly appreciated. Oh, any help concerning the use to the hand pump I found on the injection unit. Can that help me id the problem? Thanks |
RE: New to Diesels
Buy the mercedes manual on DVD from the classic center. It costs less than Haynes and tells you more. It's always a no-no to use any kind of starting fluid on any motor.
The hand pump is there to bleed the system after changing the fuel filters. |
RE: New to Diesels
This is my first Diesel as well and finally after 3 weeks I got Hiedi to start!!!!!!! Couple of things to understand about diesel engines:
1) Never shoot any starting fluid into the engine, she doesn't fire the same way as gas 2) Check the fuel system, injectors, filters, tank diesel gells up over time 3) if you get air into the fuel system she wont "fire" 4) check the gap on the valves Their are alot of guys on this forum that really know what they are talking about, got my car started with some help from these guys!!!!!! good luck! |
All times are GMT -5. The time now is 06:55 AM. |
© 2024 MH Sub I, LLC dba Internet Brands