Problem with Blower motor regulator R129
Thread Starter
|
Junior Member
Joined: Jul 2022
Posts: 1
Problem with Blower motor regulator R129
Hello all, recently I've been having problems with the blower motor regulator on my car, I've been testing it and I think it may be faulty, I've been following the StarTek diagnostic manual where it has these values.
Speed setting 1: Input 0.8-1.2V
Speed setting 2: Input 1.8-2.2V
Speed setting 3: Input 2.7-3.3V
Speed setting 4: Input >5V
but on the 4th speed, it having trouble keeping up to speed
could somebody post some of their output values from their blower motor regulator, I am quite confused as what these output values should be
Thanks.
Speed setting 1: Input 0.8-1.2V
Speed setting 2: Input 1.8-2.2V
Speed setting 3: Input 2.7-3.3V
Speed setting 4: Input >5V
but on the 4th speed, it having trouble keeping up to speed
could somebody post some of their output values from their blower motor regulator, I am quite confused as what these output values should be
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
