How to bleed cooling system
#1
04-12-2006 | 11:58 PM
Thread Starter
Joined: Mar 2006
Posts: 24
How to bleed cooling system
Hi, all.
After replacing my upper radiator hose, and re-filling the system, I drove the car for a few days, and all seemed well.
Now, however, the coolant level light remains lit, even though the coolant tank is about 3/4 full.
I suspect that there is trapped air in the system.
Where is the bleed valve for this?
1992 400E
It looks like I'll be needing the factory manual.
I understand that these are available on CD, but from where?
Regards,
Vorpal
After replacing my upper radiator hose, and re-filling the system, I drove the car for a few days, and all seemed well.
Now, however, the coolant level light remains lit, even though the coolant tank is about 3/4 full.
I suspect that there is trapped air in the system.
Where is the bleed valve for this?
1992 400E
It looks like I'll be needing the factory manual.
I understand that these are available on CD, but from where?
Regards,
Vorpal
#2
04-13-2006 | 01:12 AM
Joined: Jan 2006
Posts: 76
From: Houston, Texas
RE: How to bleed cooling system
I bought a "repair manual" on CD from eBay and it sucked - it's like some bootleg flash CD and it's worthless. I just saw some Bentley manuals (Bentley Publishing) for W124s and it was only $25 + $4 shipping. Bentley is the way to go. Haynes and Chilton aren't even worth using to wipe the oil off your hands.
Thread
Thread Starter
Forum
Replies
Last Post
