I need 'em for my SL. Gimme, gimme.

Front rotors = ?

Front calipers = ?

 

10Nm for that small screw which holds the rotor.

[IMG]local://upfiles/1/80FC52F59D54465A93E2B26500331C7F.jpg[/IMG]

 

\/

[IMG]local://upfiles/1/71C0B84684C54ED49440310949285707.jpg[/IMG]

[IMG]local://upfiles/1/EA6468102F544F29A606294FDF92EEF5.jpg[/IMG]

[IMG]local://upfiles/1/517F2F1A57E94C5A9C41DFECE20BE2F4.jpg[/IMG]

[IMG]local://upfiles/1/3BCF3D985EDA471DA1C3E17E33524818.jpg[/IMG]

 

Thank you, sir. I can use all that info. And pictures, too. My favorite.

 

sleepwalker,

I took a closer look at the images. I don't see where the torque specs are for the rotors. Am I not reading something right? You're not saying ALL the rotor bolts are 10Nm are you?

 

Do you have the torque specs for the rotors?

 

but there's only one small screw that holds the rotor.

the wheel bolt will take care of the rest.

 

Ooooh, okay. I see.

Thanks again.

 

the wheel bolt is very safe at 150Nm.

 

you'd imagine he'd get Ft/lbs, since this is the US and our mathematic-scale is f---ed up. 10Nm is about 7.5ft/lbs or around there. Just make it hand tight, dont crank down on it with a rathcet...

Matt