Hi,

Does anyone know how to reset the service "F" indicator on a 2006 E350? I believe service "F" is the same as service "B".

Please give step-by-step instructions

Thx

 

door closed..key in position 1.. cluster display on outside temp or milage...then press the button on the cluster 3 times quickly... then you should see a voltage display....press the down arrrow to service or confirm....the plus and minus buttons is how you move up and down.then then press the down page button to confirm...thats the OK button if it doesnt work then try again untill you undersstand the menu and how to navigate it.. dont messs with the other setting tho..very important. its ahrd to tell you without actaually doing it. i do it all the time and dont really think of it.

 

Thanks


What button the cluster... the reset button?

Thx

 

either an R button, or the long plastic stick thats sticks out.. i believe there is only 1

 

Also where is the "down page button"

Thx in advance

 

I don't want to screw anything that's why I am asking

Is it too much trouble to have this in step by step..... I am sure other members would appreciate that too. Like a DIY

 

under the up and down arrow keys on the wheel. its pages on those buttons that what the pictures are on the buttons..

 

ok Buddy....... So in summary


Position 0 – Locked Wheel – Engine Off
Position 1 – Wheel Unlocked – Engine Off
Position 2 - Wheel Unlocked – Engine On – This is where you normally have the key when driving
Position 3 – Wheel Unlocked – Starter Engaged

door closed

key in position 1................cluster display on outside temp or mileage

then press the reset button on the cluster 3 times quickly... then you should see a voltage display

press the down arrrow to service or confirm.... (not the PLUS or MINUS BUTTON

press the down page button to confirm...thats the OK button



Did I miss anythign..... Thanks in advance

 

yes after the voltage is displayed when you press the left side down arrow it will bring up the confirmation screen.. then use the right side minus buttons to move down to CONFIRM...then presss the down page button or the bottom page button thats closest to the center of the steering wheel. then it will say CONFIRM service ? then press the down page again... postion 0 is just putting the key in the igniton without turning it. postion 1 is turning it to the first CLICK... postion 2 is all dash lights on engine STILL off.

 

thx let me try