300CE help needed on seat removal

Reply Subscribe

Thread Tools

Search this Thread

Oct 27, 2004 | 04:00 PM

Blitzkrieg

Thread Starter

Joined: Oct 2004

Posts: 3

From:

300CE help needed on seat removal

I cannot figure out how to remove the plastic trim on my front seats to get to the 4 bolts holding each down. I have a 1992 CE. I have the Maintenance CD, and if it is in there; I sure can't find it!

Any help would be appreciated.

Oct 28, 2004 | 01:01 AM

sleepwalker

Super Moderator

Joined: Apr 2004

Posts: 7,050

From: Philippine Islands

RE: 300CE help needed on seat removal

this?

[IMG]local://upfiles/1/4032FD6CEFBE4B0E90C0B20B5A604116.jpg[/IMG]

Oct 28, 2004 | 01:35 PM

Blitzkrieg

Thread Starter

Joined: Oct 2004

Posts: 3

From:

RE: 300CE help needed on seat removal

These plastic pieces on the bottom/side of the seat is where I am stuck.

[IMG]local://upfiles/3655/1FEAD9B809A84AE0AE0A38E2F65DB5EF.jpg[/IMG]

Oct 28, 2004 | 01:37 PM

Blitzkrieg

Thread Starter

Joined: Oct 2004

Posts: 3

From:

Errrr...Excuse the grime....

That is what I want to clean up!

[IMG]local://upfiles/3655/C40C8A9FC29A439BA83838BA4E3B04E4.jpg[/IMG]

Oct 29, 2004 | 12:19 AM

MB/TECHMAN

Joined: Jun 2004

Posts: 349

From:

RE: Errrr...Excuse the grime....

NASTY .....THET SHOULD SLID OFF..UNLESS STUCK WITH GRIME..

Oct 29, 2004 | 12:48 AM

sleepwalker

Super Moderator

Joined: Apr 2004

Posts: 7,050

From: Philippine Islands

RE: Errrr...Excuse the grime....

whooah, it's really worth cleaning.

the plastic cover can be forced off in upward direction.

it's just snapped in place w/ small locks which is not difficult to pry off.

start from the large area to avoid breaking.