OK...I took off the air cleaner and box to get a better view of my fuel leak. I'm not familiar with injectors, but is there an O-ring that may have blown out? The red arrows show the location of the leak. The unions at the top of each line are tight. Someone with the know-how, PLEASE tell me the correct way to fix this. And make it simple for me! One more thing...the brass side plate wasn't very tight, so I snugged it up.
Ken


[IMG]local://upfiles/16277/A4C36C0F1F2E4248A4FC75C77FB690E0.jpg[/IMG]

 

There are small o-rings for the injectors that fail and start to leak. you have to remove the plate and install new o-rings. soak them in diesel fuel first so they are ready for installation.

good luck