2000 C280 - Stalls at Idle
Thread Starter
|
Junior Member
Joined: Jun 2005
Posts: 4
2000 C280 - Stalls at Idle
Presently showing P0305(cylinder #5 misfire) which is cyl 5?
History - 3 weeks ago, car dies and won't restart, no codes. Conferred with Marty at Just Answers; he said it was crankshaft position sensor, changed it and he was right. Car runs fine.
1 week ago, right front headlight burns out, change it and remove air cleaner hood and attachment to MAF sensor in process; next day car runs rough, stalls when giving it gas at low engine speed. Code is P0150 or 110(I forgot which but MAF) Put in a EBAY $99 special, stalling when giving gas at low speed disappears, MAF code gone but idle hunts and stalls. Drive it for 50 miles, hunting disappears(computer is learning?) but occaisional stalling at idle but improving. Any thoughts. Car has 140k, original plugs, wires, etc. (I know plugs need changing.) I sure miss the simplicity of the older cars.
History - 3 weeks ago, car dies and won't restart, no codes. Conferred with Marty at Just Answers; he said it was crankshaft position sensor, changed it and he was right. Car runs fine.
1 week ago, right front headlight burns out, change it and remove air cleaner hood and attachment to MAF sensor in process; next day car runs rough, stalls when giving it gas at low engine speed. Code is P0150 or 110(I forgot which but MAF) Put in a EBAY $99 special, stalling when giving gas at low speed disappears, MAF code gone but idle hunts and stalls. Drive it for 50 miles, hunting disappears(computer is learning?) but occaisional stalling at idle but improving. Any thoughts. Car has 140k, original plugs, wires, etc. (I know plugs need changing.) I sure miss the simplicity of the older cars.
Problem solved
Thread
Thread Starter
Forum
Replies
Last Post
