Mercedes E Class Mercedes E320 and Mercedes E500 Sedans and Wagons.

Sponsored by:
Sponsored by:

97 E 320 check engine light

Thread Tools
 
Search this Thread
 
Old Jan 23, 2004 | 07:22 PM
  #1  
vshinsky's Avatar
Thread Starter
Joined: Jan 2004
Posts: 6
From: United States
Default 97 E 320 check engine light



Hi, I own 97 E 320 with 55,000 miles. Several weeks ago my check engine light came when I was pulling to a stop (my fuel tank was full, in case it matters). I've been ingoring it pretty much for several weeks, since there were no other symptoms of a problem. Finally, I got the OBDII reading at the local AutoZone. It is P0410 which stands for Secondary Air Injection System Malfunction. I did check my fuel cap and it was on tight. Can anyone suggest what this could mean and is there anything I can do myself to fix it and/or get rid of the annoying light? I am kind of hesitantabout going directly to a dealer since my experiense with them has not been positive. I appreciate any help!</P>


Thanks, Victor.<IMG src=smileys/smiley1.gif border="0"></P>
 
Old Jan 23, 2004 | 08:54 PM
  #2  
jetforeman's Avatar
Joined: Nov 2003
Posts: 185
From: United States
Default 97 E 320 check engine light

Well, it could be several things. Your right about what the code represents, the air injection system. I would start by looking your air pump over very good, search for disconnected vacuum lines. If all looks well than it's probably your air diverter valve. I don't have a picture of it but it's part of the emissions system and isn't located too far from your air pump.
 
Old Jan 23, 2004 | 09:25 PM
  #3  
vshinsky's Avatar
Thread Starter
Joined: Jan 2004
Posts: 6
From: United States
Default 97 E 320 check engine light

Thanks a lot, Dale! I see you dedicate a lot of time to this forum.If disconnected vacuum lines ora faultyair diverter valve are a sourse of this problem and as such are corrected, should the 'chek engine' light disappear by itself or does it have to be cleared with a tool or some otherway?
 
Old Jan 23, 2004 | 09:49 PM
  #4  
jetforeman's Avatar
Joined: Nov 2003
Posts: 185
From: United States
Default 97 E 320 check engine light

it will clear itself after several days. Another way to clear it is to dosconnect the battery for a few minutes, BUT, make sure you have the radio codes to re-enter.
 
Old Jan 29, 2004 | 11:11 PM
  #5  
zardio's Avatar
Joined: Jan 2004
Posts: 9
From: United States
Default 97 E 320 check engine light

Hi, I have a similar problem. Please, could you tell me what is the: "the OBDII reading at the local AutoZone"
Does the AutoZones have an instrument to interpret my Display message: "Check engine: engine electronics" No symptoms now (originally misfired for a couple of miles).

Any help would be appreciated
 
Old Jan 29, 2004 | 11:52 PM
  #6  
jetforeman's Avatar
Joined: Nov 2003
Posts: 185
From: United States
Default 97 E 320 check engine light

yes they do, they will give you a print out of the PO code and what it means at no cost. However, they will not clear your code for you.
 
Old Jan 30, 2004 | 02:40 AM
  #7  
zardio's Avatar
Joined: Jan 2004
Posts: 9
From: United States
Default 97 E 320 check engine light

Thanks Dale about the info on AutoZones. Could you take a look at my posting "Engine misfiring "and see if you have any additional comments. Thanks again.

Zardio
 
Old Apr 18, 2004 | 11:34 PM
  #8  
tc_Sj's Avatar
Joined: Apr 2004
Posts: 21
Default RE: 97 E 320 check engine light

My wfie 1999 E320 check engine light came on, want to remove the battery see if it's reset, but can not locate the battery.

Check the manual, not thing talk about where the batery locate, engine comaprtment said battery under the seat, but can not access this location

Can some one help

Thanks
TC_SJ
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
nolen01
Mercedes E Class
1
May 7, 2015 05:58 PM
solarant
Mercedes E Class
4
Dec 27, 2007 11:34 AM
krisgt2@hotmail.com
Mercedes E Class
1
Sep 28, 2007 01:41 AM




All times are GMT -5. The time now is 02:09 AM.